Wats Motor - Café Racer - Scrambler & motos classiques
  • In Your Cart

    0 item(s) totalling 0.00€

Our Price: 17.50€ 


High temperature spray coating, flat black.

VHT FlameProof™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof™ Coating will withstand temperatures up to 2000°F (1093°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.

Temperature: 704°C-1093°C

Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads

Finish: Flat

Dry Time: Curing time required and can be done on or off vehicle (see below)

Curing FlameProof™

VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle

    Paint must be completely dry before curing
    Run at idle for 10 minutes
    Cool for 20 minutes
    Run at idle for 20 minutes
    Cool for 20 minutes
    Run under normal operating conditions for 30 minutes

Off the Vehicle

    Paint must be completely dry before curing
    Heat to 250°F (121°C) for 30 minutes
    Cool for 30 minutes
    Heat to 400°F (204°C) for 30 minutes
    Cool for 30 minutes
    Heat to 650°F (343°C ) for 30 minutes

Caution: Do not exceed the temperature of the least heat tolerant component or the base metal.

1 aerosol = 1.1 – 1.3 square meters

Recommendation for the use of the VHT paint

The primer is not mandatory but recommended for an optimal adherence. All coats should be applied whinin 1 hour including the primer. After 1 hour you have to wait 7 days before applying a new coat. The waiting time between coats should be less than 10 minutes.

Please note that spray can cannot be sent by airplane outside of Europe.

Reviews

Customers who bought this product also purchased