High quality Push/Pull universal throttle cable kit to suit a range of throttle bodies for newer Suzuki, Honda, Yamaha, Kawasaki motorbikes with high or wide handlebar.
Kit includes 2 x 2.35M of standard black conduit with PTFE (Teflon) liner, 2 x 2,6M of inner wire and selection of fittings. One end of the inner wire is fitted with a barrel nipple (6mmO.D. x 5mm BN575/55). The other end will need to be cut to length and the required nipple soldered in place. The ferrules and adjusters are a snug fit on the conduit. They can be bonded in place during the assembly or a small indentation in their side can be made using a centre punch. The fittings can be adapted for a range of models. Basic soldering kit is needed to solder the nipples in place.
You can use readily available electrical or plumbers solder for this task but look for one with a higher tin content. The higher the tin content the stronger the solder will be. If the solder wire does not already contain flux, you should purchase this separately. If you have never soldered before we recommend getting assistance from someone with more experience. To make your bond with your nipples much stronger when soldering, we recommend ‘Bird caging’ the end of the wire to splay the wire strands.
Click on the second image to check to list of nipples and accessories included in the kit .
The kit can be used with the universal push pull throttle chrome or black.
Very nice quality.
Made in England